Installing a Brick Paver Walkway or Brick Patio Installation

The use of Bricks or Pavers to produce a walkway or patio matches a house in a method that is unrivaled. In addition, installing a Brick or Paver sidewalk does not necessarily need a pro.

The secret to setting up a Brick or Paver Walkway is to very first effectively prepare the location where the bricks/pavers are to be set up. The location needs to be dug out at least a foot down, removing all topsoil and clay soil. In addition, string lines should be strung on each side of the sidewalk. The string lines suggest the completed height of the walkway.
When the area has been dug, 3/4" gravel stone must be laid in and tamped down tightly. 2" of sand, or stone dust ought to be spread over the gravel. Again the sand/stone dust need to be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline need to equate to the thickness of the brick or paver.

Now that you have a stable base, position a 1" pipeline or journal board the length of the walkway on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level surface location to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the ready area. These strips will function as your pathway border and assistance to keep the integrity and shape of the sidewalk. You can get these plastic strip borders at most house enhancement stores. The strips must be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.

You can then start to lay the bricks/pavers when this is done. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger read more nearby rows of bricks by 1/2 of a brick to interlock them. This will again assist maintain the stability of the walkway.

Inevitably bricks/pavers will require to be cut or split when constructing the pathway. To in fact cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the spot where you desire to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and pack down firmly.
Spread stone dust over the brand-new pathway and sweep into the fractures. This will complete the interlocking of the bricks and assist to eliminate any weed growth.


In addition, setting up a Brick or Paver sidewalk does not necessarily require a pro. The secret to setting up a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipe or journal board the length of the sidewalk on either side of the walkway. These strips will act as your sidewalk border and aid to maintain the integrity and shape of the sidewalk. Undoubtedly bricks/pavers will require to be cut or divided when constructing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *